1.1 Look
1.2 Listen
1.3 Check by Tensile Strength Machine.
1.4 Use the machine controller data to monitor of the whole manufacturing.
# We are the cable tie injection molding machine manufacturer.
Since 2005, we have been producing cable tie injection molding machines for 15 years.
# More than 70% market share of the cable tie manufactur machine in China.
# Wide connection with the cable tie factories.
# Know much more about the cable tie process than the cable tie manufacturers.
Like one expert, check the cable tie in complete sheet as following:
The fresh sheet of cable tie coming out from mold
Complete sheet with Scotch tape ready for courier
Request your suppliers to provide several sheets cable tie without tear down.
Then check the following:
Most of the cable tie is of original color. If the temperature control is incorrect during the manufacturing, the cable tie will turn to yellow color and degrade the quality.
Attention: never sacrifice the quality for success molding.
High temperature leads to high fluidity of raw material ( mainlyPa66 ) while degrading the quality.
Why request the high temperature:
Increasing the use difficulty
Main reason:
Tie all the cable tie from the 1st cavities to the end and listen the sound. If some sound strange, check with the same cavities No. in the next sheet.
The tensile strength is the mainly basic request for the cable tie.
cable tie quality inspection – tensile testing machine
Mark down in file the further study:
Each injection molding machine have the data record from the controller, from the data record you may monitor the manufacturing of your order.
Cable Tie Mould – Guide of 2023 All issues about cable tie mould: cable tie mould drawing, cable tie mould manufacturing process with photos and
Cable Tie Manufacturing Equipment The collections for the cable tie plant equipemnts, including cable tie injection molding machine, cable tie mold, and all the auxiliary
Cable Tie Manufacturing – by Bill Huang This article is introducing the Manufacturing of Cable Tie from three aspects: injection molding machine special for cable
# Background story
In 2018, several leading manufacturers of PA 66 suffered from force majeure, resulting in insufficient supply of PA66 raw materials, contradiction between supply and demand, and soaring prices. That means they were in urgent need of substitutes for the PA66 to reduce the production cost.
At that time, PA6 became one of the solutions. Therefore, they increased the proportion of PA6 and adopted recycling granulated material whoose main component is PA6.
# Quality Guarantee
# Lower Price and Sourcing Cost
