General Injection Molding Machine
S series – by servo motor
VT series – by variable displacement pump
Machines from 90 tons to 1000 tons.
- This complete and mature design is approved by time.
- Main components apply international brands, assuring the quality and replaceability.
- Multi-language are friendly to the operaters from difference areas.
S series – by servo motor
Specification data are subject to change without prior notice.
# Control System
- X86 300MHZ main board, 8” TFE800 *480 LCD panel.
- Adoption of RISC 140 MHZ dual core processor enabling high processing speed, closed-loop control realizes 1~2 ms.
- Providing complete SPC quality control / Superior &Inferior product identification and statistical system.
- 5+I sets independent PID control temperature by CPU with data auto-adjustment function. Extendible 6 / 12 sets connection to the mold hot runner.
- USB interface / SPC data transfer function.
# Hydraulic System
- The most suitable configuration approved in practice for years. Energy saving, stable, and durable.
- New generation servo system controller and high performance servo motor.
- New generation servo driver control system of Inovance.
- Imported high performance gear pump.
- Environment-friendly: cooling water needed is 40% – 60% lower than the machine installed with normal piston pump. High purified hydraulic oil can be used as long as five years.
- Reliable: long life of sealed parts and the overall hydraulic system because of the decrease in the temperature and the special cleaning system of the hydraulic oil.
- Low noise disturbance: compact hydraulic design enables more stable and peaceful machine operation.
# Clamping Unit
- High regidity platen ensures even stress and less chance of deformation leading to high precision clamping.
- Optimized tie bar design ensuring stable and speedy movement with less impact.
- Lengthened distance between tie bar, mold thickness and opening stroke for more flexibility of mold use.
- Optimized lubrication system ensuring precision clamping and prolonging the life time of the clamping mechanism.
- Speedy differential clamping circuit satisfying special movement requirement.
- Hydraulic driven gear mold adjustment for speedier and reliable mold change.
- Choice of multi ejector mode
# Injection Unit
- Fast response injection and sealing construction.
- Hopper slide guideway allowing more convenient and speedy material change.
- Nozzle temperature control by PID or percentage for easy processing.
- 5 stage injection, 3 stage holding pressure & 3 stage plasticizing control satisfying different product requirements.
- Precise material temperature control ensuring product quality.
VT series – by variable displacement pump
Specification data are subject to change without prior notice.
# Control System
- X86 300MHZ main board, 8” TFE800 *480 LCD panel.
- Adoption of RISC 140 MHZ dual core processor enabling high processing speed, closed-loop control realizes 1~2 ms.
- Providing complete SPC quality control / Superior &Inferior product identification and statistical system.
- 5+I sets independent PID control temperature by CPU with data auto-adjustment function. Extendible 6 / 12 sets connection to the mold hot runner.
- USB interface / SPC data transfer function.
# Hydraulic System
- Fast speed: adoption of high speed and high response variable displacement pump form Japan(Yuken), output capacity higher than normal piston pump of the same capacity by 15% – 20%.
- Power savings: can save power consumption by 25% – 70% compared with normal piston pump.
- Environment-friendly: cooling water needed is 40% – 60% lower than the machine installed with normal piston pump. High purified hydraulic oil can be used as long as five years.
- Reliable: long life of sealed parts and the overall hydraulic system because of the decrease in the temperature and the special cleaning system of the hydraulic oil.
- Low noise disturbance: compact hydraulic design enables more stable and peaceful machine operation.
# Clamping Unit
- High regidity platen ensures even stress and less chance of deformation leading to high precision clamping.
- Optimized tie bar design ensuring stable and speedy movement with less impact.
- Lengthened distance between tie bar, mold thickness and opening stroke for more flexibility of mold use.
- Optimized lubrication system ensuring precision clamping and prolonging the life time of the clamping mechanism.
- Speedy differential clamping circuit satisfying special movement requirement.
- Hydraulic driven gear mold adjustment for speedier and reliable mold change.
- Choice of multi ejector mode
# Injection Unit
- Fast response injection and sealing construction.
- Hopper slide guideway allowing more convenient and speedy material change.
- Nozzle temperature control by PID or percentage for easy processing.
- 5 stage injection, 3 stage holding pressure & 3 stage plasticizing control satisfying different product requirements.
- Precise material temperature control ensuring product quality.
