Cable Tie Sourcing Service in China
January 27, 2021
Cable Tie Sourcing Service in China 1. How to Inspect your Cable Tie? 1.1 Look 1.2 Listen 1.3 Check by Tensile Strength Machine. 1.4 Use
Cable Tie Manufacturing Equipment
The collections for the cable tie plant equipemnts, including cable tie injection molding machine, cable tie mold, and all the auxiliary machines.
The equipments is the key factor for the success molding, which is explaining one by one in detail in the article.
The equipment is the key factor for the success molding. In this article, we have listed all the necessary equipment for the cable tie manufacturing, including cable tie injection molding machine, cable tie mold, and the auxiliary machine. There are brief introductions for each one, please read the following passages:
Attention: besides the equipment, raw materials operation is the part needs to be noted .
The relation and principle please check the cable tie manufacturing, which will help you to better undestand this article
1. Cable Tie Injection Molding Machine
In the oversea market, K288F and K358F are always the first choices for clients. Their stability is approved by time. Sometime one or two of these two model machine may already make you king in your area. Cable tie injection molding machine is the frame for the cable tie manufacturing, which should be determined firstly.
K650L and K850L machines are big machine, specially for the hot runner mold.
Characters of the cable tie injection molding machine:
– Optimize clamping unit specially for cable tie mold, which is thin and long. So that the machine may carry the challenge of high pressure impact under each clamping. Assure the long life of the machine.
– Optimize barrel and screw according to the PA66’s character, solved the problem of PA66 feeding and moisture remove, providing huge plasticizing ability.
– Upgrade power system to assure the huge output under short cycle time.
An machine optimized specially for cable tie manufacturing will obtain the stable and huge productive output at once.
More specification about the machine will be sent on receipt of request email.
# K288F and K358F requests cool runner mold, breve specification:
# K650L and K850L are the huge machines, special for the hot runner mold.
2. Cable Tie Mold
Cable tie mold of cool runner.
The cavities of molds must correspond with the machine, otherwise it will lead to many problems.
More detail, please check this article: cable tie mold, information for cable tie mold design drawing, mold manufacturing, attention points etc.
Cable tie size: 2.5 x 100, 140 cavities
Cable tie size: 4.8 x 400, 24 cavities
Related Post
Cable Tie Mould – Guide of 2023
January 25, 2021
Cable Tie Mould – Guide of 2023 All issues about cable tie mould: cable tie mould drawing, cable tie mould manufacturing process with photos and
Cable Tie Manufacturing
January 23, 2021
Cable Tie Manufacturing – by Bill Huang This article is introducing the Manufacturing of Cable Tie from three aspects: injection molding machine special for cable
3. Auxiliary Machines for Cable Tie Manufacturing
3.1 Hopper Dryer
PA66 absorbs moisture. The plastic resin needs to be dried before production. (click the picture for more information)
3.2 Auto Loader
Load resin to the hopper once monitor that the hopper is empty.
Reduce the worker’s job, such as load by hand and monitor resin quantity in hopper.
Ensure the continuity of production
3.3 Mixer
Mix the resin（PA66, PA6 etc） according to our formula.
3.4 Crusher
Crush the runner.
3.5 Mold Temperature Controller
Warm up the mold temperature to assure the successful molding.
3.6 Packing Machine
Vocuum, Water Injection and Seal in one station reducing the worker’s job and worker’s number
Avoid the application of steam equipment, which is too large and low-efficient.
3.7 Unload Robot
Meet the requirement of high-speed cycle time of 24 hours.
Stable and safe for workers.
Stable output guarantee.
20 thoughts on “Cable Tie Manufacturing Equipment”
Hi,
i need a quotation for K288F machine with all the auxillaries quoted separately and combined.
Hello, dear Talha.
Thank you for leaving us a comment. Our Sales manager have contacted you with an email.
Please check your email.
[email protected]
+91 76749 28284 PHONE NUMBER
Hello, Mr. Hassan. Our manager Jane will contact you.
Hello there. Am looking for cable tie machines to start manufacturing. Please send me the details you provide in this matter
Hi, Dear Sir.
Thanks for your inquiry. Our Sales manager will contact you very soon.
You can ask her if you have any questions about the cable tie manufacturing.
I want to start making cable ties. Please share with me details of equipment and their cost.
Hi, Dear Sir.
Thanks for your inquiry. Our Sales manager will contact you very soon.
Hi
How much the machine for smallest output?
Thanks
Hi, Wendy.
Our sales manager has contacted you by email. Please check.
Thank you!
I need the quote and area required for machine installation.
Hi, Dear Vijay.
Thanks for leaving your comment. Our related colleague has contacted you by email.
Have a great day!
hey,
saw your informative post.
whats the cost and other supplies related to this.
Hello, Shivam.
Glad you find this post and hope it helps! Our sales manager has contacted you by email. Thanks for your comment.
I want a brief information of cable tie manufacturing and equipment cost
Hello, Dear Zishan.
Thanks for leaving your comment. Our related colleague has contacted you by email.
I need a cable tie manufacturing machine can you give me details??
Hi, Mr. EMU
Our manager, Jane will contact you by email.
Thanks for leaving your enquiry.
I want to know about cable tie making machine , including price, kindly send me all the details.
Hello, Mr. Kumar.
Thanks for your comment. We have contacted you by email, please check your emailbox.
Have a nice day!